Receipts by Vehicle

Replacement fuel pressure regulator 

These are sills cut out of a junkyard Isuzu Trooper for eventual use on the RS.

This invoice from youngtimerparts24 (dated June 7, 2021) documents the purchase of a Reinz valve cover gasket set for a Porsche 911 (F + G models, 1968–1989).
The total cost was €29.00 including VAT. This is a maintenance-related part purchase, likely for a valve cover reseal job.

This document is an invoice from Rose Passion dated June 1, 2021, for three Porsche parts:

• Fuel Filter
• Air Filter
• Valve Cover Gasket Set (with screws)

The total cost including shipping and VAT was €99.58, paid via PayPal. This purchase likely supports routine maintenance (fuel system, air intake, and engine sealing).

O-Ring 22 – 40 mm, 4.0 mm cord thickness, DIN 3771 NBR 70 (Ø 40 x 4 mm)

This document is an invoice from GAP Kugellager OHG dated June 1, 2021, for the purchase of a single oil seal (Simmerring) with dimensions 30×42×7 mm. The total cost including VAT was €4.30, and no shipping charge was applied.

Stud bolts, washers, hex nuts, and hex head screws (all yellow zinc plated, suitable for restoration work)

Copper nuts used in exhaust system rebuild

10 yellow zinc-plated M8 x 40 hex bolts