Maintenance Table by Vehicle

At the time, I noticed the car felt loose and generally unsettled in turns. The diagnosis work confirmed that the left rear axle was fairly chewed up, requiring a new axle, wheel bearing, and… more

This service was to install a 4.10 LSD and Jim Confortti chip as I was autocrossing the car regularly at the time. The chip is still installed, but the differential was replaced with a stock 3.73… more

In preparation for a weekend with Team O'Neil's driving school, several basic proactive maintenance items were addressed. In addition, the driveshaft began acting up and a replacement unit was… more

Replacement of both rear wheel bearings and rear barrel mounts with polyurethane bushings. 

This repair was to address a lingering transmission fluid leak that was traced back to the shift seal. 

First major job with German Motors. The 325is had a long-standing external headgasket leak that I put off for quite some time. The oil never mixed with the coolant; it just leaked a lot of oil.… more